Cranes

Moviemach (5m.)

IG CRANE total length: 4.460 mm

General Specifications:

• Front part length: 2.943 mm
• Rear part length: 1.526 mm
• Maximum width (Dolly): 812 mm
• Camera leveller width: 400 mm/250mm
• Vertical course: 3.110 mm
• Tilt angular course: 120º
• Pan angular course: 360º
• Complete crane with accessories weight
• (without counterweights): 214 kg
• Counterweight: 15 kg/3 kg
• Maximum payload: 160 kg
• Operation system: 1 seated operator - remote head
• Blocking tilt for getting out operator with counterweighted crane : NO
• Tilt brake: Yes (disc)
• Pan brake: Yes (clamp)
• Parking brake: Yes
• Steering rod: Yes (680 mm over track)
• Turnstile seat mount: Yes
• Turnstile seat mount with reglable friction brake: Yes
• Cushioned seat with distance adjustment: Yes
• Cushioned seat with hydraulic height adjustment: Yes
• Cushioned seat with pneumatic suspension: Yes
• Security seat belt: Yes
• Reglable counterweight: Yes
• Counterweight box with door and closing: Yes
• Reglables and dismountables levelling legs: Yes
• Investable camera leveller: Yes
• Dismountable camera leveller platform (feet support): Yes

Phoenix Crane (7-12m.)

The Phoenix Crane System is a modular Crane System. The Phoenix crane allows set up of a remote or platform crane version within minutes. Maximum ridge in platform version for two-man use is about 7.5 meters, in remote-head configuration it is 12 meters.

The basic version can be extended in a very short time to all other available lengths and versions as required on the set. The crane sections are made of highly resistant Aluminium and are therefore light weighing each no more than 25/30 Kg. This allows good handling and set up as well as easy transport.

Another feature is the patented self-locking system on each crane section. Thanks to the system tools are not needed and sections are quickly and safely connected in a very short time.

Scorpio crane (13m.)

SUPER SCORPIO CRANE - your telescopic crane for the 21st Century! This redesigned arm is faster, quieter and smoother than other telescopic cranes. The optional 7 ft. <2m> telescopic extension increases the maximum lens height from 30 ft. <9m> to 37 ft. <11m>. The on-board computer enables the operator, to store and recall the move of the telescoping arm.

Features:

New under / over slung levelling head plus motion capture ability.

• High resolution encoders
• Curved compensator
• Programmable limits
• Redesigned cabling system
• 1m and 2, sections offer nine possible lenght configurations. The minimum lenght is 3m and the maximum lenght is 13m. Even when fully extended to its longest reach, the Scorpio Crane will support a 3 axis remote head and complete camera package
• The Scorpio Crane can achieve a remarkable lens height of 12,2m and a minimum lens height of -8,3m that's an effective lift range of 20,5m!
• Lightweight construction and very quick set-up and break-down, only 20 minutes for one grip and the assistant, with just using one allen key

The Scoprio Crane has been computer designed for optium strenght and maxium safety and stability. It as ben rigorously tested. Furthermore each tube has a certification number printed on the bracket. The Scorpio Crane has been certified to European safety standars.